The case for power quality management is certainly one of the most critical issues facing not just the industries, but everyone involved in it. It’s related to the wider issues for conservation and proper management of the entire human existence in the 21st century.
However, the greatest impact potential rests upon the occurrence of the situation known as a distributed generation by large scaled power consuming units for companies. And, it can be supposed that LV Switchboards applied across such units can bring a real difference to the question of proper power quality.
What are the main concerns of power quality management?
Managing power quality is mainly focused upon realizing the control, which can effectively extend and present an extremely perfect AC Sine Wave. The nature of this kind of power supply has become a cornerstone of large-scaled, grid-operated power supply in every imaginable way.
They are mostly concerned with such issues as harmonics and distortion, transients, power factor, voltage sags, and dips, as well as instability in current and voltage. It becomes quite evident that control positions across the large scaled distribution of electrical power could be featured as the main signposts of effective management in terms of controlling factors.
What are the considerations to be made across LV Switchboards?
One of the major concerns plaguing any case of power distribution is the factor of effective compatibility, in terms of looking over the package of considerations that generally feature across power distribution in general. It’s usually begun by setting limits upon the emissions upon all the equipment so that there is uniform electromagnetic compatibility all over the board.
Secondly, experts also tend to set specific rules and regulations across the equipment in order to keep all possible data regarding distributed generation remains under control. This is specifically stated as the Point of Common Coupling, which can consider several technical characteristics to properly control, and oversee the distribution of entire electric power.
It can be regarded that above everything else, the case for LV Switchboards acquires a pedestal of discussion and consideration that cannot be ignored anymore. Most of the social fabric requires large organizations churning out immense power on a daily basis to take a step back, and view everything from a more progressive perspective.
It shall never be forgotten that all are responsible for the future, and power quality management certainly presents a highly attractive solution.
Energy is what makes the whole world work. Without it, there could not have been any existence possible would be quite fairly accurate in every way. One of the major concerns in the world today centers the topic of energy conservation itself. After everything else, the resources that have piled upon this earthy are limited, and at some point in the future, they will be completely exhausted. Humans have been able to progress into modern times by utilizing these natural resources in order to effectively control their surrounding environment to their advantage, and consequently transforming it to serve their own advantage. Smart Energy Management is a facilitation of technological solutions that can effectively bring this factor down, resulting in widespread energy conservation in a decided game changer.
What is Smart Energy Management?
Any system that is based upon this strain of technology can be effectively overseen, and controlled in person so that all possible consumption activities are efficient, working in a truly unobtrusive way that might result in some significant losses in energy. This is at the core of the entire concept behind how modern technologies that have been created by humans using natural resources are serving to conserve itself. These services can also be optimized in according to various essential conditions. These may include the size, the frequency and the location of various consumption points involved in an energy supply grid or network.
How can it be truly advantageous in the face of daily widespread consumption?
Any energy management system may also be utilized to analyze energy consumption patterns of specific consumption in accordance to the sources with the help of effective cost centers, as well as various modes of services provided by certain companies in the energy sector. They are, in fact, quite great in serving their innate functions allowing for conservation of a lot of energy consumption across large scale complexes, industrial or otherwise. Smart energy management can also offer solutions by reviewing data to equipment, and services so that there may effective allocation of energy at every turn.
Such a system can be enforced by proper implementation of organizational change for conservation actions, and approaches in any possible way. This is achieved through what is commonly known as the Energy Management Cycle. Just like any other organizational process aspect, they can function on their own allowing companies to not only be efficient in their goals, but also allow for a great deal of support for the entire community and society as well.
One such business is Neptune India, which provides and innovates several products that can serve to this demand end among large scale industries and individuals alike. Smart Energy Management not only helps in the possible cost management that can be used in other more advantageous purposes, but they also help in creating a better for the future generations in a truly effective way about how should the society must treat their surrounding environment.
Electrical networks create high loads which varies the power demand on its supply. Power factor relay known as APFC relay are then, designed to optimize extra power of an application. The Real time display of the relay shows minor effects of electrical disturbance. APFC are used for the improving Power Factor which is helpful in measuring electric consumption & distribution for maximum efficiency. This in turn reduces the harmonic current & expenditure also.
Best APFC Relay in India is designed using advanced technology which is easy to install, where there will not be any problem for over voltages. The efficient relay requires less maintenance & is even bearable. The insulated controller protects the electrical equipment & is long lasting in nature.
The Capacitors are connected/ disconnected automatically with the help of these APFC relay in panels. APFC panels are constructed using capacitors, reactors & harmonic filters so as to save energy. The unblemished equipment with long lasting corroded body makes it more observable. In big factories/ industry, the APFC switches ON / OFF to maintain the power factor. The high power bills from electricity boards face a huge loss of energy due to above reasons.
A number of Best APFC Panel Manufacturer in India installed it in big electrical factories & industries. The equipment can be run without much bothering about its maintenance. It can work easily for more than a decade when good quality capacitors are installed.
The highly sensitive panel by Neptune India meets the modern technical requirements according to national as well as international standards.
With the increase in Industrialization, the requirement for more power in factories & industries is also increasing. The extra power & frequencies sometimes become problematic in an electrical environment.
Harmonics are the frequencies in an electrical circuit that can create some serious end results & are considered as very harmful within an electrical system. These harmonics are the causes for power quality obstacles.
The harmonics are unwanted loads creating uninterruptible power supplies. This can cause reliability issue which can cause increased currents, voltage & electrical networks also. These issues can be avoided when harmonic mitigation is implemented. A Power factor controller is also helpful to improve power quality perfectly, without creating any complications of fluctuations in power supply.
Linear & non-linear loads create disturbances in the power system results in harmonics. In industries & big factories, these harmonics lead to hindrance in factory work & other required necessities. Not only power interruptions, Harmonics also create heat losses, which can damage equipment and reduce the potentiality of the equipment required in factories. The consequences will then lead to stress on the cables and equipment. In industries these kinds of harmonics is not affordable, the reason being, production or manufacturing will be stopped, which may result in cut down of costing & therefore, profit margins.
Power interruptions leads to unfavorable troubles, thus, Harmonic filters optimize the current making the equipment run smoothly. Harmonic Mitigation diminishes the extra energy of the electrical circuit, & hence, detects a disturbance in the current.
This technological low-cost option eliminates the risk of power & current loads. While using harmonic mitigation some factors such as reliability, simplicity, effectiveness, energy & cost efficiency is taken into consideration.
Level of harmonics, by implementing some methods mitigation techniques can be reduced. Low harmonic drives as well as reactors are excellent solutions to overcome distortions. The solutions to harmonic deprivation may lead to big losses for a lot of industries.
Thus by limiting harmonic emissions & by reducing the overloading of cables or transformers can prevent these losses. Also, a variety of strategies can comply with the harmonic disturbances for preventing future plans.
Power quality, involves steady voltage flow & frequency within a consistent range. Some electric devices can cause interruptions in flow of current leading in fluctuations. The fluctuations sometimes occurs because of heavy flow of current, which results in Equipment or circuit failure. The problem can also be caused by external sources, maybe at the time of lightning, circuit overloading, or improper wiring. This poor power quality creates hindrance to your business or other important works. This can also lead to overheating of electrical distribution leading to short circuiting.
Power quality is the togetherness of input & output of the current flow that describes electric power that drives an electrical strain and ability to function in a proper manner. Lack of proper power may lead to malfunction, failure of devices prematurely. The electricity in the form of AC power moves through the wiring system of the end user.
Main reasons for poor power quality are:
- Dip in voltage between 10% and 90% due to fault in installation of heavy motors resulting in disconnection & loss of efficiency.
- Interruptions due to insulation protection device failure, lightning etc. This may lead to stoppage of all power equipment’s.
- Variation of the voltage because of Lightning, switching &disconnection of heavy loads. This could lead in destruction of electronic components.
- Harmonic distortions caused due to heavy electric machines generally high efficiency components. This can result in overloading & overheating the system.
- Voltage fluctuations & noise are Though they are not so destructive but can affect home appliances.
Some solutions to overcome this problem are:
- Harmonics: The modulation from AC to DC & vice versa requires some sort of converters such as inverter to capture extra flow of voltage. One best solution for this difficulty is Harmonics. Harmonic mitigation cuts down the extra energy of electrical circuit, improving power factor. They are meant to detect any disturbance in the load current. Harmonic filters are known product to meet the current distortion, making it energy efficient. The technological designing for medium to large load networks are highly reliable & cost effective.
- Grounding: Grounding is one of the most important of the electrical system, prevents static charges to build up. There is a current carrying conductor which limits the voltage potential of the equipment.
- Noise filters: They are used to avoid unwanted voltage signals (noise) from reaching sensitive equipment.
- Voltage restorer: It acts like a voltage source connected with the load.
- UPS: They are designed to provide continuous power to the load in case of interruptions.
Power, the renewable source of energy, where India is third largest producer & consumer of electricity. Being on this ratio, power cuts & other related problems are quite common in the country. After the surplus generation of energy, there are still many underprivileged places. Apart from that, the places where numerous amount of energy is supplied, faces some general issues regarding the flow of voltage.
Power factor is defined as the current absorbed during the load to the current flowing in the circuit. Usually the load with a low power factor draws more current than a load with a high power factor.
Power-factor correction panels increases the power of a load, improving efficiency of flow of current. APFC Panels monitors the power which saves the energy & improves efficiency with effective solutions. Some of advantages of Power factor correction panels are:
- Avoids sanctions for the Low Power Factor
- Limiting the arousing Power Factor
- Decrease in pausing circuitry.
- Enhancing the performance of equipment’s.
- More probability of Life- long assurance of cables & other electrical components.
- Lowering the loss in circuit lines.
- Cut down the cost &energy by saving power.
- The installation & configuration of the device is not complicated.
- The monitoring & accuracy made this device indifferent.
This devicecontrols performance of various electrical appliances offer effective monitor and control performance for various electrical applications. APFC panel manufacturers such as Neptune India has hold- up this charge of these electric obstacles. The panels are cost efficient & in demand in Indian market by various big organizations. More often installation/ configuration of these panels in big factories is highly recommended where the power is the primary tool to run their business. Lack of this primary need, may lead to big losses to all big companies.
Mr. Deepak Kapoor set up Neptune India Pvt. Ltd. in 1989, an organisation offering integrated energy solutions that would help it’s equally environmentally conscious customers to reduce their energy consumption and encourage efficient usage through high quality products and sustainable solutions. More than two decades later, the company has grown and expanded on his vision to offer solutions and products to manage all aspects of energy – Connecting Energy, Distributing Energy, Managing Energy, Saving Energy and Power Quality.