| Technical Data |
Parameters |
| Operating Voltage (Un) |
3×230 AC ,3×240 AC+/- 10%,50/60Hz |
| Voltage Range |
(0.9-1.1)xUn |
| Operating Current |
50mA-5.5 A |
| Capacitors Steps |
8 &12 |
| Network Type |
Three CT,3 Phase |
| Accuracy Current |
1% +/-1 digit(V,I Cos phi) and 2%+/-1 Digit(W,Var,VA) |
| Current Transformer Ratio |
5……10000/5A |
| NO-Volt Feature |
In case of Power Failure longer than 200mSec,All Capacitor Steps are disconnected Automatically |
| Power Consumption |
<2 VA(Current Circuit) and <3VA-10VA (Voltage Circuit) |
| Cos Phi setting |
0.8< cosphi |
| C/k Setting |
0.02-1.00 |
| Time Delay Between Steps |
2-1.800Sec( For Switch on/off Separately) Discharge Time(Reconnection time)-2-1.800Sec |
| Over Voltage Setting |
230-275V AC (Selectable) |
| Factory Set Values |
Cos phi=1 ind.,Step Time =7Sec, Program=PS5,C/k=0.02 |
| Output Contact |
3A,750VA |
| Display |
RED LED,4 Digit,14 mm Height(144x144mm) |
| Ambient Temperature |
-5 to 55 C |
| Protection class |
IP20 |
| Weight |
0.8Kg |
| Dual Target Cos Phi (For Mains & Generator) |
YES |
| Automatic Energy Correction |
YES |
| Automatic Disconnection of Damaged Cap. Steps |
YES |
| Programmable THD-I and THD-V Alarm |
NO |
| Programmable Discharge Time |
YES |
| Programmable Over Voltage Alarm |
YES |
| Automatic Over Voltage Alarm |
YES |
| Automatic Power Calculation |
YES |
| Programmable Energy Ratio Alarm |
NO |
| Password Protection for Setup |
NO |
| RS 485 Communication |
NO |
| Alarm Contact OutPut |
Yes |
| VLN Ph-Neutral Voltage |
Yes |
| VLL Ph -Ph Voltage |
Yes |
| Phase current Amperes |
Yes |
| Active Power KW |
Yes |
| Reactive Power Kvar |
Yes |
| Apparent Power KVA |
Yes |
