NEPTUNE Elsteel Switchboards
Techno Module
Bus Bar System
Elsteel Inserts
Instant Plate
Certificates

NEPTUNE Elsteel Switchboards

Elsteel is an internationally reputed company manufacturing Low Voltage Type Tested Modular Enclosure systems, plus 19" Cabinets, Instant Panels, Terminal Boxes and Wall Mounted Boxes both in Mild (IP65) and Stainless Steel (IP66). Our strength lies within the R&D department which is constantly working in developing the existing and new the products in order to make better and safer enclosure panels for panel builders and end users.


 

Techno Module

TECHNO MODULE is a patented 3 dimensional construction system for making panel boards.

It is fully type tested in accordance with IEC 60439-1 equivalent to BS 5486 part 1. Many type tests have been and carried out at independent and accredited test stations, in IPH Berlin and Falcon Testing Laboratories in UK (ASTA). Techno Module is also tested for Internal Arc Faults at the Australian Electrical Testing Station Adelaide plus seismic (earthquake) tests. Elsteel Techno Module systems provide cost effective, high quality, low voltage electrical enclosures to customer requirements. Due to the modular design changes to the panels are easy during assembly or after commissioning
 

It's ideal for

Main Switchboards
Distribution switchboards
Motor Control Centers (MCC)
Fixed or Fully Withdrawable
Power Factor Correction Centers
UPS Applications

 

 

Key Features


Modular system based on 200 mm width, height, depth modules
Smooth powder coated finish (RAL 7032)
Suitable for different climate conditions
High strength low weight modules
Type Test Certified (0 Amp - 7100Amp)

 

 

Bus Bar System

Elsteel provides you series of type tested bus bar holders made out of extremely strong and self extinguishing fiber material.

 

 
 

 

Elsteel Inserts

Elsteel Inserts will provide you the experience of great flexibility. You can configure your panel to form 2, form 3, or form 4 very easily. With the Elsteel system you can install equipment from any manufacture!!!
 
 






 

Instant Plate

The concept of this system is to economically build a panel Instantly. The huge advantage is that all TM parts fits in to this panel. The panel is built by assembling sides, top and bottom plates to suit your panel size Instantly. Assembly time will not be more than 15 minute. There after door, covers, mounting plates, cross sections, busbar's can be assembled.

Storing Instant plates is the other benefit since very little space is required. When fully assembled panel will reach a IP 55 rating. Just as the TM panel any changes to sizes, dividing into sections during or after assembly is possible.
 

 

 

Certificates

  1. Degree of protection test (IP test) for BOX enclosure.
    Degree of Protection (IP test) was carried out according to IEC 529, for Box enclosures made of mild steel and painted in gray (RAL 7032). The requirements for IP55 construction were fulfilled.
     

  2. Degree of protection test (IP test) for TECHNO MODULE & INSTANT PANEL SYSTEMS
    Degree of Protection (IP test) was carried out according to IEC 529, for Techno Module & Instant Panel made of mild steel and painted in gray (RAL 7032). The requirements for IP55 construction were fulfilled.
     

  3. Temperature rise test and Short Circuit Withstand test for 2500A TECHNO MODULE SYSTEM
    Temperature rise test was carried out according to IEC 439-1 edition 1985.
     

  4. Degree of Protection test (IP 66 test) for MILD STEEL BOX
    Degree of Protection (IP test) was carried out according to IEC 529, for Mild steel enclosures. The requirements for IP66 construction were fulfilled.
     

  5. Temperature rise test and Short Circuit Withstand test for 3200A TECHNO MODULE SYSTEM
    Temperature rise test was carried out according to IEC 439-1 edition 1992
     

  6. Temperature rise test and Short Circuit Withstand test for 5000A TECHNO MODULE SYSTEM
    Temperature rise test was carried out according to IEC 439-1 edition 1994.
     

  7. Temperature rise test for Distribution Bus bar system with tap-off 68630
    Temperature rise test was carried out according to IEC 439-1 edition 1992 for distribution bus bar system with tap-off bracket 68630.
     

  8. Full type test on 5000A TECHNO MODULE SYSTEM
Verification
  • Temperature-rise limits
  • Dielectric properties
  • Short-circuit withstand strength
  • The effectiveness of the protective circuit
  • Clearances and creepage distances
  • Degree of protection
  • Mechanical operation

  1. Full type test on 2500A TECHNO MODULE SYSTEM
     

  2. Vibration Testing of as Elsteel TECHNO MODULAR SWITCHBOARD SYSTEM
    Vibration test was carried out according to IEC 68-2-6 (1995-03) and IEC 68-2-36 Test Fdb (1973) Standards.
     

  3. Vibration Testing of as Elsteel TECHNO MODULAR SWITCHBOARD SYSTEM Seismic Vibration
    Vibration test was carried out according to IEC 68-3-3 (1991-02).
     

  4. Standard Internal Arcing Fault Test
     

  5. CSA Standard for Stainless Steel Boxes and Stainless Steel Terminal Box
     

  6. Main Bus bar system of a low-voltage switchgear and controlgrear 7100A
     

  7. Type test on 1600A TECHNO MODULE SYSTEM with GE Breakers.
     

  8. Type test on 2500A TECHNO MODULE SYSTEM with GE Breakers.
     

  9. DNV Management System Certificate.
     

  10. RoHS Certificate
     

  11. 1000v Low voltage test
     

  12. Type test on 6000A TECHNO MODULE SYSTEM
     

  13. Type test on 6300A TECHNO MODULE SYSTEM